Auto detailing is a specialized cleaning job. The process is slightly more complicated than normal cleaning applications. When you clean a vehicle, you come across various types of surfaces and different types of stains and impurities. This makes auto detailing a more demanding cleaning process than others, including jobs like cleaning a house or cleaning the machinery in a factory. In particular, mobile auto detailing is the most demanding as it often requires the use of powerful machines in remote locations where electricity, water, and other resources may not be readily available.

The Need for Specialized Auto Detailing Devices

An automobile consists of components made of metal or metal alloys. Body, chassis, and parts of the engine are examples of the hard components of the vehicle. It also contains softer parts such as seats, headliners, mats, and upholstery.

For cleaning the metal surfaces, high temperature and moderate pressure levels output are required. For example, to remove petroleum and oil residues and grease from engine parts, one has to use pressure washers that can provide an output pressure levels in excess of 1000 psi and an output temperature of about 300°F.

However, if you apply the same temperature and pressure levels on seats, mats, or upholstery, you will end up damaging these parts. Therefore, carpet cleaners are used for removing stain and dirt from car mats and upholstery. Designed specifically for upholstery and automotive cleaning, the temperature of these devices range up to 210°F and the pressure level can reach up to 150 psi.

In short, any professional cleaning agency that wants to make a name for itself in the auto detailing sector should have both low-flow pressure washers and carpet cleaners at its disposal. Mobile auto detailing, a sector of the auto detailing industry, requires that these machines are mobile.

Essential Considerations

There are two essential considerations for selecting equipment for detailing automobiles. First, auto detailers must consider the flow rate of the pressure washer. Flow rate measure the amount of water ejected from the machine. High flow rates will damage a vehicle's painted exterior. Thus, top suppliers offer low-flow steam pressure washers with flow rates as low as 0.5 GPM for auto detailing applications.

For upholstery and interior cleaning jobs, drying time is important to consider. Drying time is the time required for vehicle, its body, interior, and components, to get rid of the moisture content and to get back to the functional mode. The latest carpet cleaners feature low-flow technology to reduce drying times from the tradition 24 hours to as low as 2 hours. This increases productivity and reduces vehicle storage requirements for auto detailers.

Check the Source of Power

In professional auto detailing agencies, the operators often use mobile car wash devices. Normally, the pressure washers use an electric power source. However, for portable car wash devices, it is ideal to use propane or gasoline as the power source. Such devices can be used for auto detailing in places where an electric power source is not readily available.

Remember, when selecting the right machines for any auto detailing task, low-flow pressure washers and carpet cleaners are the best solutions. They will make your interior and exterior detailing jobs quick and easy. Additionally, top distributors will offer mobile options for mobile car detailing applications.

Article Source: http://www.ArticleBlast.com