|
Use of Straightening Machine |
Saturday, 31 July 2010
|
Section Straightening Machines are use to straighten Section Like Iron angle, Channels, Beams, Flats, Hex, Square and any profile Sections like Z Section, F7 Section. These machines are widely use in straightening of Iron angle in various sizes. This Section is mainly used in Transmission Line Tower, Microwave Tower and Electric sub Station. After Rolling of Iron Angle, it got bend during its cooling on due to its profile type. This is not possible to use this section for fabrication immediately after cooling, It require straightening before use, & cantilever type Section Straightening Machines are best equipment for Straightening of This Section. These types of machine are very convent in changing of rolls for different sections. However for Heavy angle like 150 x 150 x 20 and above where Angles are rolled from High Tensile Steel, We recommend double supported Straightening Machine. All Types of models are design on the basis of Section Size and accordingly we design centre distance of the Rolls in between. This centre of rolls indicates the size of Machine. We have manufactured Machine for Iron Angle up to 250 x 250 x 35 mm and for I Beam up to 600 x 210 mm so far. The centre distance of this model is 1000 mm driven by 180KW.
The roller section straightening machine is most
suitable for straightening of any rolled, drawn or extruded ferrous and
non-ferrous in cold condition. This machine is engineered to give trouble free
long life service. The body and base of are fabricated from mild and steel and
steel plants duly stress relied and machined as per design. All straightening
rolls (topes and bottom) are mounted on cantilever type spindle. This
arrangement is most suitable where quick change of rolls is required. The gangs
of bottom rolls are driven by a distribution gear train. The directions of
bottom rolls are clockwise/ anticlockwise depending upon of material. The top
rolls for applying straightening pressure on material. These are having up-down
and axial adjustment from front by hand wheels or optional motorized system. Article Source: http://www.ArticleBlast.com |
Design Fabrication & Consultant Engineers expert in
designing & fabrication work especially in Straightening Machine, Section
Straightening Machine, Angle Straightening Machine, Transmission Line
Tower, and Rolling Mill
Equipment. We have hard core system based on state of art technology with
excellence performance.
You are welcome to publish this article free of charge on your website, newsletter, or e-zine, provided:
- You don't change the article in any way
- You include the entire article, including the "about the author" box
- All hyperlinks must remain intact, including email addresses, and the link to ArticleBlast.com at the bottom
- In doing so you agree to indemnify the article's author, and ArticleBlast.com and its directors, officers, employees and agents from and against all losses, claims, damages and liabilities which arise out of its use
- It is also recommended that you provide a courtesy copy of your publication to the author of the article
