|
Understanding of General Steel Erection Process for Structures |
Article Submitted by: James Lee
Wednesday, 22 July 2009
|
Erection is the process of erecting or linking together the different shipping parts at the project site. Success of erection process more or less is dependent on the accuracy of the erection drawings and the precision in the fabricated steel. If steel is not fabricated according to the steel detail drawings or if the detail drawings are in error, erection is disrupted. There are other important factors which affect steel erection process and its success - erection of columns, plumb & bolt, welding, safety and decking. Erection of steel columns is the first and most important element of erection process. Column base plates are connected to the base using anchor bolts placed in the concrete as per the erection drawings. The location of the anchor bolts for a single column in the foundation must match precisely the pattern of bolt holes in the base plate. Plumb and bolt is the method of placing the steel assemblies in right locations, aligning them and briefly bolting them in place. Safety is an activity carried out by a separate team that installs cable handrails and required safety tools before welding team starts it work. A welding team or multiple of them are then responsible for final welding of all the assemblies in accordance with the provided steel erection drawings. Decking is the process of placing corrugated bent plate on the structural frame. Decking is a structural element resulted from bending of plate into a corrugated shape. The depth or height of the corrugations and the length or frequency of the corrugations influences the decking's strength greatly. Sometimes the erector sub-contracts or outsources design and detailing of the deck to CAD service providers. For further information on steel erection, fabrication and detailing email us at info@outsourcingsteeldetailing.com Visit us at http://www.outsourcingsteeldetailing.com Article Source: http://www.ArticleBlast.com |
About The Author:
James Lee is certified steel detailer at OSD - a leading steel detailing firm based in India providing quality steel detailing, drafting and shop drawings to its offshore clients based in US, UK, Canada and Australia. For further details email us at info@outsourcingsteeldetailing.com
You are welcome to publish this article free of charge on your website, newsletter, or e-zine, provided:
- You don't change the article in any way
- You include the entire article, including the "about the author" box
- All hyperlinks must remain intact, including email addresses, and the link to ArticleBlast.com at the bottom
- In doing so you agree to indemnify the article's author, and ArticleBlast.com and its directors, officers, employees and agents from and against all losses, claims, damages and liabilities which arise out of its use
- It is also recommended that you provide a courtesy copy of your publication to the author of the article
