Are your parking skills "less than perfect?" Do you back up an inch at a time for fear there is something behind the vehicle you cannot see? Unfortunately, that "something" could be a garbage can, a bicycle or your child. Consider installing rear parking sensorsthat activate when the vehicle goes into reverse, using radio waves to detect objects hiding behind the vehicle. A warning signal becomes progressively louder as the object gets closer, alerting the driver in time to avoid hitting it. Installing rear parking sensors is not a difficult project and can be complete within a few hours.

Decide on location of sensor units. Measure the length of the Car MP3 fm transmitter, under the left or right bulkhead. This will ensure no water can damage the control box unit. Use double-sided tape to secure the control box in place and press firmly.

Step 5Install warning siren. Since the siren can become quite loud, installing it in the trunk of your vehicle is a good idea. Plug the siren connector into the control box and use ford car double-sided tape to secure in place.

Step 6Install display unit. Some car parking sensor include an LCD monitor that you can install on the dashboard of your vehicle. Use double-sided tape to place and secure the monitor and run the wires back through to the location of the control box, and then plug the monitor wire into the control box.

Article Source: http://www.ArticleBlast.com